Adecomm transceiver (sfp+ lc connector), fiber channel sfp-16g-sr 850nm vcsel transmitter, pin photo-detector, up to 100mts, sff-8431(eic) and sff-8472 (ddm), msa compliant

Descripción

adecomm transceiver (sfp+ lc connector), fiber channel sfp-16g-sr 850nm vcsel transmitter, pin photo-detector, up to 100mts, sff-8431(eic) and sff-8472 (ddm), msa compliant
the adecomm transceiver (sfp+ lc connector), fiber channel sfp-16g-sr 850nm is a small form factor pluggable sfp+ transceiver module for 16g fibre channel (16gfc) applications. it supports links up to 100m over om3 multimode fiber. this module features a highly reliable 850nm vcsel transmitter and pin photo-detector into a duplex lc optical connector. it?s also a multi-rated 850nm optical transceiver that supports 14.025/8.5/4.25g fibre channel specifications. it complies with small form factor pluggable multi-sourcing agreement (msa) sff-8431 rev. 4.1 and sff-8472 rev. 11.0. it?s suitable for use with san switches, routers, network interface cards (nics) and other storage networking equipment.

features
? up to 14.025gb/s bi-directional data links
? optical interface compliant to ieee 802.3ae
? electrical interface compliant to sff-8431
? hot pluggable sfp+ footprint
? 850nm vcsel transmitter, pin photo-detector
? built-in cdr with shut-off control
? single +3.3v power supply
? advanced firmware allow customer system
? cost effective sfp+ solution enables higher port densities and greater bandwidth
? rohs compliant and lead-free

specification:
form factor: sfp+
data rate: 14.025 gb/s
wavelength: 850 nm
fiber type: mmf
max distance: 100m on om3
optical components: vcsel/pin
transmitter power: -6.5 ~ -1.2 dbm
extinction ratio: > 3.5 db
receiver sensitivity: < -10.5 dbm receiver overload: > -1 dbm
f.o. connector: lc duplex
digital diagnostic monitoring: yes
operating: 0°c to 70°c
storage: -40°c to 85°c

application
high-speed storage area networks
? switches and hubs
? network interface cards
? mass storage systems
? host bus adapters
tri-rate 4g/8g/16g fibre channel

compliance:
iec/en 61000-4-2, iec-60825, fda 21cfr 1040.10 and 1040.11, rohs